Board Logo

ProSlot Euro Competition Motor
Massiven - 8-2-2008 at 08:27

Hi folks,

just asking myself if the ProSlot Euro Competition Motor is already for sale. Could somebody please give me the ProSlot part number? Should be something like PS-40xx.

Cheers,
Mike


2h - 8-2-2008 at 10:41

It it not really commerciably available - as it it is supposed to be a competition motor ONLY. To be handed out at IMCA events and returned after the events - returned to ProSlot for re-furbishing.

I have, however, ordered a number of them from Dan Debella, they will be available at cost for practise and set-up purposes only.

I charge DKK 250 (35€) each + plus shipping.

Please send me an email to henrik@scaleracing.dk


soper3140 - 8-2-2008 at 10:54

Hi Mike,

I found this in a German Shop

http://www.slot-car-racing-shop.de/epages/61453911.sf/de_DE/?ObjectPath=/Shops/61453911/Products/%22ProSlot%20Euro%20PS-4002-IMC A%20Motor%22


Massiven - 8-2-2008 at 15:04

Hiho.

I got confirmation from Markus (owner of the A96 Slotcarshop). I'ts the motor used at IMCA races. He only got 20 from Dan. I ordered 2 of them now (1 for Psycho Seif and 1 for me). Otherwise it would be impossible for us to find the car setups for the worlds 2008. They cost 35€ there too. Heavy price!

How do they feel these motors? How much RPM do they have? Are they comparable to the old ones?

Cheers,
Mike


tamar - 28-2-2008 at 17:10

Quote:
Originally posted by Massiven
Hiho.

I got confirmation from Markus (owner of the A96 Slotcarshop). I'ts the motor used at IMCA races. He only got 20 from Dan. I ordered 2 of them now (1 for Psycho Seif and 1 for me). Otherwise it would be impossible for us to find the car setups for the worlds 2008. They cost 35€ there too. Heavy price!

How do they feel these motors? How much RPM do they have? Are they comparable to the old ones?

Cheers,
Mike


Hello Mike, hello all
I talked to Dan Debella (Pro Slot) and the Official name for the motor is the ProSlot PS-4000-IMCA. The 35€ is a hefty pricetag but with the IMCA spec's (american arm, matched magnets, thicker can and ballbearing on the pinion side) the motor is more than worth it. It will last longer and should it start to wear, you can always send the motor back to Proslot for refurbishment (cutting the comm, rebalancing, realignement and new brushes) for something like 15-20$

Although it was not part of the motivations for the IMCA spec's (which were more equality and better endurance) the S-4000-IMCA has a much better torque and efficiency.

When we used the motors ifor the first time in Olso its performance was in fact so much better that it upset the carefully created balance of the weight calculator.
At 14.2 volts it had no problem dragging 229 gr heavy cars around the track. Where as the old motor got hot and died on you if you got above the 218 -220 gram.

We're now considering (and testing) running the motor at less than 14volts for future events.

I've attached the dyno test Dan did on the first batch of IMCA motor's.