Board Logo

GRC 1/24 at Dunkerque
eur961 - 24-4-2005 at 00:39

Some pics of the second round of "our modest" GRC Championship (SMC24) at Dunkerque (on a very exciting 6 lanes Carrera track) this saturday

http://slotracing.proboards22.com/index.cgi?board=WPendurance&action=display&num=1114289858


eur961 - 24-4-2005 at 23:05

Some other pics from:

http://users.skynet.be/carrera-slot-racing/smc24_dunkerque_2005.htm


eur961 - 25-4-2005 at 09:52

And some more pics on

http://users.skynet.be/hobbies/smc2005dunkerque.htm


http://users.skynet.be/hobbies/ciractu2005/smc2005dunkerque/cover.jpg


Sideways - 25-4-2005 at 10:24

Hi Eur961,

Looking good, nice pics and a great field of group c cars.
The cars are looking good and the results of the race are very close I noticed.

Greetings,

Onno.


tamar - 25-4-2005 at 12:56

Hello Stephane

looked like you guys had a lot lof fun!
I saw 2 nice looking Lancia"s on the grid, do you have more pictures of them?


eur961 - 25-4-2005 at 13:00

Some important features of our competition:

-The engines (Bison) and the tyres (already fitted on rims) are provided by the organisation
- The field of cars is large because we limit the number of each model
This year, only one or two specimens of each model are allowed except the Porsche 956/962 who is allowed in 4 specimens (many Porsche at the start of GR C races during the 80's...)
-We impose different decorations on each car
-A replica of a real decoration gives a bonus of some points. At Dunkerque, the winners lose this bonus with a ... yellow Ford Probe
-Even if it is not mandatory, many teams are "pro-am": one or two (very) good drivers with one or two less faster
-The winner team of a race must take 30 grs of weight at the next race, the second: 10 grs
the fourth loses 10 grs, the fifth loses 30 grs. It is a first try with this weight scale. It is possible we have to adjust next year...


eur961 - 25-4-2005 at 13:13

Quote:
Originally posted by tamar
Hello Stephane

looked like you guys had a lot lof fun!
I saw 2 nice looking Lancia"s on the grid, do you have more pictures of them?


The Lancia's were a little bit less pretty this time because the decoration suffered at the first round at Dison.

I have a good picture of the Lancia Martini, more pretty at Dison, before the race...

http://users.skynet.be/hobbies/ciractu2005/smc2005dison/smclancia.jpg

Some of our guys are not already fully able to produce "sturdy" decorations for scale races

NB: and some of our guys seems to have not already fully understood the importance of a low body on the châssis... :D

http://users.skynet.be/hobbies/ciractu2005/smc2005dunkerque/dutoyota.jpg


tamar - 26-4-2005 at 02:39

Hello Stephane

Thx for the pictures, I thought I saw a late version of the LC2 on the smaller pictures. do you know who made this kit?


Gert - 26-4-2005 at 09:28

Tamar

Go to the URL there are more pictures of the LC2

Greetz Gert

http://www.ultimatecarpage.com/frame.php?file=comments_add.php&carnum=248


eur961 - 26-4-2005 at 14:52

Quote:
Originally posted by tamar
Hello Stephane

Thx for the pictures, I thought I saw a late version of the LC2 on the smaller pictures. do you know who made this kit?


The two Lancia's are Tamiya - Tamtech


CarreraHenk - 26-4-2005 at 16:08

I have heard that these TamTech bodies are made from styrene. Is this allowed in the LMS group C rules?


tamar - 27-4-2005 at 08:44

Hello Henk
Its been a while since I've actually seen a original Tamtech body in "the Flesh".

All I remember is that they were completely transparent, material could be styrene, but as they were intended for RC use it could also have been very thick lexan.

I would say try to get hold of one so we can measure and weight the body, for as now I dont see any major problems.


CarreraHenk - 27-4-2005 at 16:41

hello Tamar,

I will try to find one decently priced. As for now, I remember that someone in the Dutch treads was writting he would build the LC2 from a Tamtech body. I remember asking him about his livery as I intended to build a LC2 too. Maybe you know who that was and already ask him for the details?

Greatz,

Henk


Paal - 27-4-2005 at 18:59

The original Tamtech bodys was made of 2 mm thick clear Polycarbonate, also known as Lexan the trademark og GE the producer. But by all accounts these bodys was injection molded, not vacuum molded, thereby they where very much hard bodys like any kit!!

The resent Tamtech bodys I have bought on eBay has been made in another plastic ABS with Polystyren windows molded into the body. These are also made by injection molding.

Anyway, the Tamtech bodys ought to be applicable for your gr. C rules as they are all very heavy and made in the same way as a plastic kit. The resent reissue of the Tamiya Porsche 962C is taken directly from the original Tamtech molds!!

Why I know all this shit??? Well, I spent three years of my life selling plastics and I have talked to the danish Tamiya importer about the reissue!