2.6 Front Wheels:
--snip--. The maximum difference between the inner –and outer diameter of the Tire is 3.0 mm. The minimum Tire diameter applies on the biggest measured diameter.
Tire Width: Minimum 8.0 mm

Eh, what does this mean? That you can grind the front tires, so that you have Ø 24mm at the outside and Ø21mm at the inside. That the angle can be cut on the entire width of the tire??

Hello Henrik,

It must be 0.3 mm.


best regards,

Peter

Sorry Peter
I found this in Rules and regulation

2.6 Front Wheels:
Rim: make, brand and specification free.
Rubber, type and brand are free, with the exception of silicon tires. Front Tires may be coated.
Tire Diameter: Minimum Ø 24.0 mm. The maximum difference between the inner –and outer diameter of the Tire is 3.0 mm. The minimum Tire diameter applies on the biggest measured diameter.
Tire Width: Minimum 8.0 mm

So that means according to the rules the different between inner and outher is 3.0 mm

Greetz Gert