Topic Posts
 
Topic PostsLMS-forum
 

Not logged in


Recover Lost Password | Register     

     Printable Version | Subscribe | Add to Favourites

     Body Talk: Pininfarina P4/5 Competizione M (Ferrari) for Jim Glickenhaus
  Post new thread Poll:  
fola





Posts: 338
Registered: 8-10-2006
Location: The PLANET Earth.
Member Is Offline
Mood: ADMIN wanna be I D A M N right I'm building again & Sleepless in the celler
posted on 4-1-2013 at 13:24 Reply With Quote
Pininfarina P4/5 Competizione M (Ferrari) for Jim Glickenhaus



Hi Guys,
been away for a while, but still very busy and active.
here are the latest developments regarding the car we will race at the NURBURGRING race
on Swisttals SPA track in Germany.
The "Old" kit I had was "nice" but a bit round and a tad too high.....
the 2011/12 version is a lot sleeker, and the nose is totally different plus. it has the fin in the roof.
meaning a lot of sanding, cutting, filling work needed to be done to get to
the new slim streamlined shape that the 2012 version has.

Started by marking the areas in need of attention, on a slush copy of the current version.
Chopped the roof and channelled the sides in order to bring the car down about 7mm
a feat only for the brave as you can see in the pics....


https://lh4.googleusercontent.com/-Q2kvnan70z8/UNzsuRRqmTI/AAAAAAAATUw/xzyqlJr-uuU/s512/DSC09489.JPG

https://lh4.googleusercontent.com/-9FjdHcxzOYc/UNzsvXpa4dI/AAAAAAAATU0/ngOgpGJ_51E/s512/DSC09490.JPG

https://lh4.googleusercontent.com/-btIak2JyZaU/UN2CP_EDxRI/AAAAAAAATW0/kyBfEfyP6qs/s512/DSC09507.JPG

With the body "dropped", it was time to remodel the front areas .- Nose air intakes
on the bonnet and on the widened front fenders

https://lh4.googleusercontent.com/-3p-MziOXKwU/UN4ycHidUiI/AAAAAAAATZE/hmH57JRVJvw/s512/DSC09522.JPG

https://lh4.googleusercontent.com/-QD2z-oy4Lf4/UOHAVmzMsaI/AAAAAAAATbI/de-D2qZDQbM/s512/DSC09536.JPG

https://lh4.googleusercontent.com/-FUR3N03dlG0/UOL_hd70wsI/AAAAAAAATlw/0qrrzHhFzKQ/s512/DSC09551.JPG


Grafted the air vents on to the widened front fenders...

https://lh5.googleusercontent.com/-ZOPUocs5FAs/UORrO2616sI/AAAAAAAATo0/6yJpVzTTLt4/s512/DSC09566.JPG

and reshaped the front air vent....

https://lh5.googleusercontent.com/-2ZBHSa86MuE/UORrVJWAUvI/AAAAAAAATps/TNlMrCDyoak/s512/DSC09573.JPG


and created the roof air scoop out of hardened body filler.... and the fin with plastic sheet.

https://lh6.googleusercontent.com/-i5BlczK5tdA/UORrPuP3OeI/AAAAAAAATo8/gMn9DRIBqaw/s512/DSC09567.JPG

https://lh4.googleusercontent.com/-ypIZDRKMuHw/UORrX1GIo1I/AAAAAAAATqA/nyJrp1JPkIc/s512/DSC09576.JPG

https://lh3.googleusercontent.com/-h-DP0oPlhKQ/UORrbKzuztI/AAAAAAAATqg/SlHYQE_XKwM/s512/DSC09580.JPG

https://lh5.googleusercontent.com/-j3nqcPmpFww/UOTTonZ2nOI/AAAAAAAATsE/fjJV5-1zbMs/s512/DSC09587.JPG

https://lh4.googleusercontent.com/-gUjhMrOLAUE/UOTTnGyTpgI/AAAAAAAATr8/Rq8jksc7b3Q/s512/DSC09586.JPG

The rear needs some reworking, hood pins final finishing then I can get on with
laminating and building the actual car.....

will keep you posted ;-)

Ciao,
Fola

https://picasaweb.google.com/oeps10/P45V2


https://picasaweb.google.com/oeps10/P45c


The "old" Car....
https://lh4.googleusercontent.com/-w-qWeiM5agI/Tx0rluqgm2I/AAAAAAAAOC4/nxYcsC_l31s/s912/DSC07237.JPG

https://lh4.googleusercontent.com/-jaPPOd_znjY/Tx0rlA263NI/AAAAAAAAOCw/_2BTPr6_kI4/s912/DSC07235.JPG

https://lh4.googleusercontent.com/-f_1A21awgkg/Tu8PF5wxP6I/AAAAAAAANh0/znuAsLmJFMY/s912/DSC07079.JPG




Von 908#17
View User's Profile Visit User's Homepage View All Posts By User U2U Member
fola





Posts: 338
Registered: 8-10-2006
Location: The PLANET Earth.
Member Is Offline
Mood: ADMIN wanna be I D A M N right I'm building again & Sleepless in the celler
posted on 4-1-2013 at 13:25 Reply With Quote


did a little more work last night....
the front airscoop detail had to be scratch made out of plastic sheet
I did a bit of cleaning up of the rear end and since all that Primer
and sanding took off the detail of the hood latches I drilled/sanded them
off completely and installed new P.E pieces, also drill out the door pulls
and remade a pair.....

Let the pix do the talking .!
https://lh3.googleusercontent.com/-dHtTKe9Vn6c/UOYu6KeUP6I/AAAAAAAATwY/ILOwUCC8GPg/s640/DSC09592.JPG
 
https://lh3.googleusercontent.com/-PQKaJyCZA0M/UOYu8j1-KUI/AAAAAAAATws/1Kw1wSIporQ/s640/DSC09594JPG
 
https://lh5.googleusercontent.com/-wh8tgcQ7AJ0/UOYu_ItmpZI/AAAAAAAATw8/ydOkcK4FuOY/s640/DSC09596JPG
 
https://lh6.googleusercontent.com/-ixhMFxm6Etg/UObKG6XkLQI/AAAAAAAATzw/89Qllc5PMjM/s640/DSC09612JPG
 
https://lh6.googleusercontent.com/-SeL13jSJiUk/UObKHs_NGnI/AAAAAAAATz0/YU4gHjlDRz4/s640/DSC09613JPG
 
https://lh4.googleusercontent.com/-VszQ_dUa2oA/UObKPwGuDBI/AAAAAAAAT0w/NUN6OOFfJZ8/s640/DSC09620JPG
 
https://lh5.googleusercontent.com/-NtquKEFUnJE/UOYvMMMSdWI/AAAAAAAATx4/-8cxQ96smzQ/s640/DSC09604




Von 908#17
View User's Profile Visit User's Homepage View All Posts By User U2U Member
fola





Posts: 338
Registered: 8-10-2006
Location: The PLANET Earth.
Member Is Offline
Mood: ADMIN wanna be I D A M N right I'm building again & Sleepless in the celler
posted on 6-1-2013 at 09:44 Reply With Quote


Small update.....
the love of detail is a killer (of time ,-) !
decided to get on with the rear end as I had been putting it off
because I just knew it would be a load of work and would not be
easy at all...
 
started out by cutting some aluuminium mesh (on .3mm plastic sheet  to shape,
https://lh4.googleusercontent.com/-0dt-punvtoQ/UOinHKaDgKI/AAAAAAAAT2g/1to53BV7E3o/s512/DSC09628.JPG
 
then thin strips of sheet for the outlines of the rear grill, and tubes of various diameters
for the light housings and openings for the rear exhaust pipes which are much higher
up on this version. 
https://lh6.googleusercontent.com/-GslnpizmZPs/UOinJbkw8iI/AAAAAAAAT2s/MZO7McR_xf0/s512/DSC09630.JPG
 
https://lh5.googleusercontent.com/-9SMGuJm1pbE/UOinLy-9ApI/AAAAAAAAT3A/B2r0rOMrAEo/s512/DSC09632.JPG
 
then it was time for the rear air vents and side markers...  more cut sheet...
https://lh6.googleusercontent.com/-ufgXRl1dAZU/UOinMuvnqFI/AAAAAAAAT3I/xbJVren_gWo/s512/DSC09633.JPG
 
https://lh4.googleusercontent.com/-02iHzU3UX18/UOinbIXfeSI/AAAAAAAAT3g/0sLN_31MaSA/s512/DSC09636.JPG
 
https://lh6.googleusercontent.com/-DV2XgnKdGhM/UOinf-bmo1I/AAAAAAAAT38/hcE7c_oXKL0/s512/DSC09640.JPG
 
and then finally the test fitting of the lexan windows.....
 
https://lh5.googleusercontent.com/-BThqsvo5sA0/UOjdFmRucxI/AAAAAAAAT5A/MpQ3NJbggoM/s512/DSC09648.JPG
 
... more later on  !
have a great sunday !
 
https://lh6.googleusercontent.com/-y7ifrhlZess/UOk38fAXh6I/AAAAAAAAT6Y/687R5zD_vIw/s512/p45%20decal%20sheet.jpg




Von 908#17
View User's Profile Visit User's Homepage View All Posts By User U2U Member
tamar





Posts: 804
Registered: 5-1-1989
Location: Gouda
Member Is Offline
Mood: A new beginning ;)
posted on 6-1-2013 at 13:47 Reply With Quote


Impressive work, as always ;)



With kind regards
Tamar
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
fola





Posts: 338
Registered: 8-10-2006
Location: The PLANET Earth.
Member Is Offline
Mood: ADMIN wanna be I D A M N right I'm building again & Sleepless in the celler
posted on 7-1-2013 at 10:20 Reply With Quote


thanks, Master!!



Von 908#17
View User's Profile Visit User's Homepage View All Posts By User U2U Member
fola





Posts: 338
Registered: 8-10-2006
Location: The PLANET Earth.
Member Is Offline
Mood: ADMIN wanna be I D A M N right I'm building again & Sleepless in the celler
posted on 7-1-2013 at 10:20 Reply With Quote


Finally satisfied with the way it turned out i decided to (finally) go ahead and prepare the 
master body for the making of the silicon mould....
 
https://lh4.googleusercontent.com/-cJib6Ia4HWM/UOmu1iL87aI/AAAAAAAAT8I/x3kl-7nlMuI/s512/DSC09654.JPG
 
https://lh3.googleusercontent.com/-i8NF4cNlp3o/UOmu0vi3TQI/AAAAAAAAT8A/Km4aYdiQpIs/s512/DSC09653.JPG
 
and after a lot of dirty work, voila´!!!
 
 
 
https://lh4.googleusercontent.com/-NLmFxgtQA9c/UOneyYQR2DI/AAAAAAAAT84/ggqqir1zCmA/s512/DSC09656.JPG
 
https://lh5.googleusercontent.com/-feIljy26q3I/UOne0X6mdeI/AAAAAAAAT9U/RB4f1vFkeuA/s512/DSC09658.JPG
 
 
https://lh4.googleusercontent.com/-fQpatrCcevQ/UOqBEZoMYMI/AAAAAAAAUB0/SaZBDcAI5js/s512/DSC09668.JPG
 
NEXT!!!!!
;-)




Von 908#17
View User's Profile Visit User's Homepage View All Posts By User U2U Member
Post new thread Poll:

Go To Top