Search   ProSlot motor mounting on Plafit Very nice! Is this the expensive rear holder you were refering too? Where did you get the heat sink ... 14-4-2008 at 18:40 by: Bimmer520 ProSlot motor mounting on Plafit For others, the 1.3mm base has the part# PF1701B and you can find it here: http://www.plafit.de/ind ... 11-4-2008 at 09:33 by: Bimmer520 ProSlot motor mounting on Plafit I am not going there, but I can try to get the product name for them so you can order them directly ... 11-4-2008 at 06:06 by: Bimmer520 ProSlot motor mounting on Plafit Looks good! Nice job with the rear motor mount You have the short Schöler motor mount. The "Nor ... 10-4-2008 at 06:59 by: Bimmer520 Traction tips I think your post describes traction tuning very well Observing how the car handles and how it des ... 8-4-2008 at 12:27 by: Bimmer520 ProSlot motor mounting on Plafit Fola, I used this motor holder from Schöler: http://www.norsk-bilbaneforum.com/shop/index.php?ma ... 7-4-2008 at 11:55 by: Bimmer520 ProSlot motor mounting on Plafit This is what I ended up with. I used a Schoeler Pro Slot motor mount that is slighly modified to be ... 7-4-2008 at 10:07 by: Bimmer520 ProSlot motor mounting on Plafit We use 27.5mm wheels, and that requires about 1mm spacer for 1mm ground clearence. Then I have almos ... 3-4-2008 at 13:18 by: Bimmer520 ProSlot motor mounting on Plafit I am building a new Plafit PF1700KSLP chassis and will be using a Proslot PS4000 motor. This is what ... 3-4-2008 at 10:27 by: Bimmer520 why not fixed controllers at worlds? I have just designed my own controller. It has adjustable responce time that can smooth the output v ... 7-3-2008 at 08:24 by: Bimmer520

» Search